The TV port is an interface board for any Amiga 600/1200 with the TV modulator removed. The free space allows a hardware interface to be neatly routed to the outside of the Amiga 600/1200 desktop case. The following interfaces are available: 1x USB (pic 2), 1 x HDMI FFC (pic 4), HDMI Indivision MK2cr/MK3 (pic 3) or 1x Micro-SD (pic 5) (selectable above). The TV port can be easily installed in the Amiga 600/1200 using the innovative mounting block supplied. In order to be able to use the respective interfaces with the TV port, the corresponding hardware for this must already be installed in the Amiga 600/1200.
To use the USB interfaces, a USB card must be installed on the clock port of the Amiga 1200 or on a clock port card (e.g. A604n) in the Amiga 600. Basically, all cards that comply with the USB standard when connecting the USB interfaces will work. The best known USB cards such as the RapidRoad or the Subway (only via USB Subway adapter or USB Power adapter) are compatible and have already been tested.
HDMI interface (Indivision)
In order to be able to use the HDMI interface for the Indivisions on the TV port, a Scandoubler must be present in the Amiga 1200. The scandoubler must be compatible with either the Indivision MK2cr or the MK3. For the Indivision MK2cr, an additional cable is required, which can be ordered optionally from the TV port. Both Indivision scandoublers have already been successfully tested.
HDMI interface (FFC)
To be able to use the TV port with HDMI interface FFC, a turbo card with HDMI output must be present in the Amiga 600/1200. The output only has to adhere to the standard assignment of HDMI. You also need an HDMI ribbon cable with an HDMI plug (optionally available).
In order to be able to use the MicroSD interface, an SD2IDE or MicroSD zu IDE converter and an angle adapter must be available on the internal 2.5 inch IDE port. SD card or micro SD taps and cables are already included in the TV port package.
This Product was added to our catalogue on 30/08/2023.