ZuluSCSI Wide - The first Ultra Wide SCSI emulator

ZuluSCSI Wide is an advanced high performance SCSI storage emulator with support for 16-bit Wide and Ultra Wide SCSI. Developed by Rabbit Hole Computing, ZuluSCSI Wide is equipped with a standard Half-Pitch 68 pin "HPDB68" SCSI connector. ZuluSCSI wide is a single-ended SCSI device, but can be used with nearly all SCSI controllers that support LVD/SE operation, as the SCSI controller itself will fall back to single-ended mode.

ZuluSCSI Wide supports Ultra Wide synchronous and asynchronous SCSI transfers, with read speeds up to 34 megabytes/second.  A sufficiently-fast SD card and SCSI controller with Wide or Ultra Wide SCSI support is required to achieve maximum throughput.

ZuluSCSI is easy to use: Simply place an appropriately named disk image or CD-ROM ISO on your SD card in order to present it for use by your SCSI host system. ZuluSCSI Wide supports both FAT and ExFAT-formatted SD cards of up to 1.5TB in size.

Documentation for ZuluSCSI Wide is available here.

New ZuluSCSI Wide features

• Ultra Wide SCSI @ 20MHz
• 68-pin SCSI connector (both internal AND external, includes retention tabs)
• Up to 34 megabytes per second read, 15 megabytes per second write.
• SCSI Initiator support in 16-bit Wide mode
• Included four-pin Molex power connector

Board dimensions: 90mm by 100mm. The four M3-sized mounting hole dimensions are identical to those found on the bottom of any 2.5" hard drive, allowing you to use most commodity 2.5" to 3.5" mounting brackets/adapters to mount your ZuluSCSI.

ZuluSCSI Wide board dimensions are identical to that of SCSI2SD V5.1/V5.2/V6.
All mounting solutions designed for SCSI2SD V5.1/V5.2/V6 work just as well with ZuluSCSI Wide.