ZuluSCSI V6.4 Rev. 2024a - SCSI to SD adapter

ZuluSCSI V6.4 Rev. 2024a is a modern SCSI hard drive and CD-ROM emulator that can be used as a drop-in replacement for any older SCSI hard drive, CD-ROM drive and other types of SCSI block devices.

Features

• ZuluSCSI V6.4 currently supports synchronous transfers at up to 10MB/s, both read and write.
• Descended from SCSI2SD V6, and works like SCSI2SD V6.
• Full-Size SD card slot.
• USB-C port.
• Access to the data via USB. The ZuluSCSI V6 drives will appear when connected to a modern computer via USB.
• With Rev 2024a, this is currently limited to around 1.2MB/s (USB FS speeds)
• A floppy-style berg power connector.
• Integrated active SCSI termination, enabled via software configuration, using ZuluSCSI-V6-util

• SCSI-2 Narrow 8-bit 50-pin connector.
• SCSI FAST-10 10MB/s synchronous transfers
• SD Card Interface    Full-size SD, tested up to 512GB
• USB Interface    Firmware updates, configuration, and mass-storage
• USB-C, Mass-storage at USB 2.0 FS speeds (1.2MB/s max)
• Power    5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power.
• 2.35W maximum (500mA)
• Dimensions (L x W x H)    10cm x 9cm x 1.5cm
• Up to 10MB/s under optimal conditions.
• Worst-case performance is generally ~5.5 megabytes/second