TV Port - port adapter for Amiga 600 / 1200

The TV port is an interface board for any Amiga 600/1200 with the TV modulator removed. The free space allows a hardware interface to be neatly routed to the outside of the Amiga 600/1200 desktop case. The following interfaces are available: 1x USB (pic 2), 1 x HDMI FFC (pic 4), HDMI Indivision MK2cr/MK3 (pic 3), 1x Micro-SD (pic 5) or 1 x VGA ScanPlus/Indivision MK1 (pic 11) (selectable above). The TV port can be easily installed in the Amiga 600/1200 using the innovative mounting block supplied. In order to be able to use the respective interfaces with the TV port, the corresponding hardware for this must already be installed in the Amiga 600/1200.

USB interfaces
To use the USB interfaces, a USB card must be installed on the clock port of the Amiga 1200 or on a clock port card (e.g. A604n) in the Amiga 600. Basically, all cards that comply with the USB standard when connecting the USB interfaces will work. The best known USB cards such as the RapidRoad or the Subway (only via USB Subway adapter or USB Power adapter) are compatible and have already been tested.

HDMI interface (Indivision)
In order to be able to use the HDMI interface for the Indivisions on the TV port, a Scandoubler must be present in the Amiga 1200. The scandoubler must be compatible with either the Indivision MK2cr or the MK3. For the Indivision MK2cr, an additional cable is required, which can be ordered optionally from the TV port. Both Indivision scandoublers have already been successfully tested.

HDMI interface (FFC)
To be able to use the TV port with HDMI interface FFC, a turbo card with HDMI output must be present in the Amiga 600/1200. The output only has to adhere to the standard assignment of HDMI. You also need an HDMI ribbon cable with an HDMI plug (optionally available).

MicroSD interface
In order to be able to use the MicroSD interface, an SD2IDE or MicroSD zu IDE converter and an angle adapter must be available on the internal 2.5 inch IDE port. SD card or micro SD taps and cables are already included in the TV port package.

VGA interface (ScanPlus/Indivision MK1)
To be able to use the VGA interface on the TV port, a Scandoubler must be present in the Amiga 1200. The Scandoubler must be compatible with either the ScanPlus or the Indivision MK1. Both Scandoublers have already been successfully tested.

Features

• Four different TV ports are available: 1x USB, 1x HDMI FFC, 1x HDMI Indivision MK2Cr/MK3,1x Micro-SD or 1 x VGA ScanPlus/Indivision MK1 (selectable above)
• Easy installation due to supplied mounting block, which also insulates the circuit board downwards
• Fits perfectly into any Amiga 600/1200 case without TV modulator

System requirements

• Amiga 600/1200 without TV modulator (Fits standard A1200 as well as A1200.net cases)
• For USB: Installed RapidRoad USB or Subway USB card (only with USB Subway adapter)
• For HDMI: Installed Indivision MK2cr or Indivision MK3 compatible scandoubler
• For Micro-SD: Installed SD2IDE/MicroSD to IDE converter with angle adapter
• For HDMI FFC: Turbo cards such as Icedrake, Vampire 2 or PiStorm with HDMI connection
• For VGA: Installed ScanPlus or Indivision MK1 compatible Scandoubler

Included

• TV port interface board (VGA, USB, Micro-SD, HDMI Indivison MK2cr/MK3 or HDMI FFC)
• A bolt with matching nut
• Mounting block with three separate lugs (one for safety)
• Manual
• The version with micro SD output comes with a cable. A choice must be made between SD or MicroSD output. (selectable above)
• Optional: Cable for Indivision MK2cr (selectable above)
• Optional: USB connection cable for USB version (selectable above)
• Optional: HDMI ribbon cable (selectable above)