OmniPort EX - expandable multiport adapter

The OmniPort EX is an extended version of the OmniPort multiport adapter, which neatly routes various hardware interfaces to the outside of the Amiga 1200 desktop case via the expansion port. The interfaces in the basic version are 2x USB, 1 x HDMI and 1x Micro-SD. The special feature of the EX version is that the motherboard can be equipped with an additional sandwich board. Here, boards for 1x USB, 1x Micro-SD, 1x HDMI for Indivision MK3 or 1x HDMI FFC with ribbon cable clamp connection are available (selectable above). The innovative mounting block supplied makes it very easy to install the sandwich board together with the motherboard in the Amiga 1200. In order to be able to use the respective interfaces with the OmniPort, the corresponding hardware for this must already be installed in the Amiga 1200.

USB interfaces
In order to use the USB interfaces, a USB card must be installed on the clock port of the Amiga 1200. Basically, all cards that comply with the USB standard when connecting the USB interfaces will work. The best-known USB cards such as RapidRoad and Subway (only via USB Subway adapter) are compatible and have already been tested.

HDMI interface (Indivision)
In order to use the HDMI interface for the Indivisions on the OmniPort, a Scandoubler must be present in the Amiga 1200. The scandoubler must be compatible with either the Indivision MK2cr or the MK3 in the pin assignment. For the Indivision MK2cr an additional cable is required, which can be ordered optinally from OmniPort. Both Indivisions have already been tested successfully.

HDMI interface (FFC)
To be able to use the HDMI interface FFC sandwich board on the OmniPort, a turbo card with HDMI output must be present in the Amiga 1200. The output only has to adhere to the standard HDMI assignment. You also need an HDMI ribbon cable with an HDMI plug.

MicroSD interface
In order to use the MicroSD interface, an SD2IDE or MicroSD to IDE converter as well as an angle adapter must be present at the internal 2.5 inch IDE port. SD card or micro SD tap and cable are already included in the package.

Features

• Up to four different interfaces can be cleanly routed out of the Amiga 1200's expansion port
• Many different combinations are possible due to the sandwich boards (selectable above)
• Easy installation due to supplied mounting block
• Fits perfectly into any Amiga 1200 case (standard A1200 as well as A1200.net)

System requirements

• Amiga 1200 with free expansion port (Fits standard A1200 as well as A1200.net cases)
• For USB: Installed RapidRoad USB or Subway USB card (only with USB Subway adapter)
• For HDMI: Installed Indivision MK2cr or Indivision MK3 compatible scandoubler
• For Micro-SD: Installed SD2IDE converter with angle adapter
• For HDMI FFC: Turbo cards such as Icedrake, Vampire 2 or PiStorm with HDMI connection

Included

• OmniPort interface board
• SD card or MicroSD card tap with cable (selectable above)
• Two screws with matching nut
• Mounting block
• Matching backplate for the expansion port of the A1200
• Individual colours of the fascia can be printed as a 3D model yourself
• Manual
• Optional: Cable for Indivision MK2cr (selectable above)
• Optional: USB connection cable for USB card (selectable above)
• Optional: A piggyback board. Choice of: 1x USB, 1x MicroSD, 1x HDMI for Indivision MK3 or 1x HDMI FFC with ribbon cable connection