ZuluSCSI V1.2 - SCSI to SD adapter

ZuluSCSI V1.2 - SCSI to SD adapter
For a larger view click on the thumbnail
¤ 104,95
19 % VAT incl. excl. Shipping costs
Stock: Product not available

Shipping time: unknown

Products description

ZuluSCSI V1.2 is a SCSI hard drive and CD-ROM emulator that can be used as a drop-in replacement for any legacy SCSI hard drive, CD-ROM drive and other types of SCSI block devices.

By default, ZuluSCSI direct/raw passthrough mode is enabled, which causes ZuluSCSI V1.2 to represent the entire SD card as a single SCSI device, with the device type and SCSI ID defined by a knob and a DIP switch.

If you move DIP switch #2 to the "OFF" position, ZuluSCSI V1.2 behaves identically to ZuluSCSI V1.1 and ZuluSCSI RP2040 and uses image-based files to represent hard drives/block devices.

  • 8-bit single-ended SCSI 50-pin internal IDC connector
  • Maximum read speeds with ZuluSCSI V1.2 can be up to 4.5 megabytes/second if the SCSI controller is fast enough.
  • ZuluSCSI uses the same SCSI command processing code as SCSI2SD V6, compatibility with almost all devices that speak both SCSI-1 and SCSI-2 is extremely high. Emulates up to 7 SCSI devices simultaneously, including CD-ROM
  • Supports both SCSI-1 and SCSI-2
  • SCSI termination is controlled via DIP switches
  • SCSI device type is set via rotary knob
  • Hardware eject button and pin header
  • Supports both synchronous and asynchronous SCSI transfer modes.
  • Highly configurable with a text-based ini file, zuluscsi.ini
  • External LED pin header for the connection of external LEDs.
  • Designed to be powered via SCSI termination power when provided by the host
  • Optional DB25 header for direct connection of an external SCSI connector, in addition to the 50-pin IDC connector with one end
  • The dimensions of the four M3 mounting holes are identical to those on the bottom of any 2.5-inch hard drive, meaning you can use most commercially available 2.5-inch to 3.5-inch brackets/adapters to mount ZuluSCSI.
  • Identical dimensions and mounting holes as SCSI2SD V5.1, V5.2 and V6, making it compatible with many existing SCSI2SD-specific mounting solutions
  • 74LVTH125 SCSI bus transceiver
  • Easy firmware upgrade; as simple as putting a file on the SD card.
  • Digital manual

2 years warranty

Product Features

Hardware suited for ...Hardware suited for ...:Amiga 2000Amiga 2000, Amiga 3000Amiga 3000, Amiga 4000Amiga 4000

Recommended products:

Alinea Computer recommends

ZuluSCSI RP2040 - SCSI to SD adapter
Shipping time: 3-4 Days
¤ 99,95
19 % VAT incl. excl. Shipping costs

Customers who bought this product also bought the following products:

2-fold disk drive power cable
Shipping time: 3-4 Days
¤ 6,99
19 % VAT incl. excl. Shipping costs
Amiga Floppy cable
Shipping time: 3-4 Days
¤ 7,99
19 % VAT incl. excl. Shipping costs
OmniPort - Multi port adapter for Amiga 1200
Shipping time: 3-4 Days
from ¤ 25,95
19 % VAT incl. excl. Shipping costs
AmigaOS 3.2 Rom
Shipping time: 3-4 Days
from ¤ 12,95
19 % VAT incl. excl. Shipping costs
Rom V7 for A590 / A2091
Shipping time: 3-4 Days
¤ 29,95
19 % VAT incl. excl. Shipping costs

This Product was added to our catalogue on 29/06/2022.

Welcome back!
Shipping country