8 MB Fast-Ram memory expansion + IDE port for A500/2000

Very compact 8MB FastRAM memory expansion including BSC-AT-Bus IDE controller for the Amiga 500 and 2000.

Based on the design by Oleg Mishin https://github.com/OlegMishin/A500_8MB_ide2.

Features ( bold - design changes by Lotharek)

• Bootable IDE (44 pin), a patched scsi.device does not need to be present in the Kickstart ROM for autoboot.
• Supports Kickstart 1.3 and higher.
• Can boot WB 1.3 and higher from HDD. 8MB RAM is also recognised in WB 1.3.
• Motorola CPU present on the board in smd package /plcc/
• Different CPLD used - 95144XL, therefore firmware revised.
• Ide connector rotated 180 degrees - when ide2sd adapter is connected, the SD card is on top
• Hybrid smd/tht socket at the bottom - I am very proud of this solution
• Flash ROM contains BSC Octopussy ROM and can be reflashed on-board.
• Works with A500/A500+ and 2000.
• Does not work with CDTV due to the DMAC on the board (current firmware).
• PCB - 4 layers, HID board
• Newly designed / manufactured in Poland by Lotharek