Daughterboard with four PCI and three ZIII slots for Amiga 4000D in the standard desktop case.
The Mediator PCI 4000 Di daughter board is designed to enable expansion of Amiga 4000 desktop with a wider range of the PCI cards, including cards which require 3.3V power rail. The solder mask of Mediator PCI 4000Di 3V is also black.
The minimum hardware configuration is an Amiga 4000D in a standard desktop case.
The recommended configuration is an Amiga 4000D in a standard desktop case, any 68060 (or PPC with 68060) turbo card with 128MB RAM, a SharkPPC G3/G4 card with 256MB SDRAM, a Voodoo3 graphics card.
4 PCI slots (PCI 2.1 compatible)
3 Zorro III/II slots
66/33MHz PCI clock (transfer rate up to 264MB/s)
32-bit PCI datapath
4GB PCI memory space
Busmastering/DMA in all PCI slots
SDRAM/SGRAM of PCI gfx card as a fast DMA buffer
DMA to A4000 motherboard space
Address and data parity control support
Interrupt controller (4 lines to each PCI card)
Compatibility with all A4000 processor card models
Simultaneous operation of up to four PCI and up to three Zorro III/II cards